Table of Contents
Advertisement
Recording
Adjusting Bright/Dark Portions
Applicable modes:
You can adjust the brightness of bright and dark portions on an image while checking the
brightness on the screen.
1
Select the menu.
[MENU] > [Rec]>[Highlight Shadow]
2
Press 2/1 to select the item.
Item
(Standard)
(Raise the contrast)
(Lower the contrast)
(Brighten dark areas)
/
/
(Custom)
3
Rotate the front/rear dial to adjust the
brightness of bright/dark portions.
A Bright portion
B Dark portion
C Preview display
•
The rear dial is for adjusting dark areas, and the front dial
is for adjusting bright areas.
•
To register a preferred setting, press 3, and select the
destination where the custom setting will be registered to
([Custom1] (
•
Adjustments can also be made by dragging the graph.
4
Press [MENU/SET].
•
The screen display can be switched by pressing [DISP.] on the brightness adjustment screen.
•
Settings registered to
• Turning off this unit will return the
setting.
42
VQT5A95 (ENG)
A state with no adjustments is set.
Bright areas are brightened, and dark areas are
darkened.
Bright areas are darkened, and dark areas are
brightened.
Dark areas are brightened.
Registered custom settings can be applied.
) /[Custom2] (
) /[Custom3] (
will be stored even after this unit is turned off.
/
/
setting adjusted with
[Highlight Shadow]
Description of settings
) ).
back to the default
/
/
A
HIGH LIGHT
SHADOW
B
C
Advertisement
Table of Contents
