Taking Pictures With Burst Mode - Panasonic DMC-LC5PP Operating Instructions Manual

Hide thumbs Also See for DMC-LC5PP:
Table of Contents

Advertisement

\
^ Taking Pictures with Burst Mode
56
By continuously pressing the shutter
button, it is possible to record in burst
mode. (4 frames/second maximum of 8
frames)
[Preparation]
* Set the operational mode dial and REC
mode dial. (P25)
1
Set the operational mode dial to burst
mode [kh].
2
Press the shutter button halfway to
lock the focus, then press it fully to
take pictures in sequence.
* It is possible to record in burst mode 4
frames in 1 second, at a shutter speed
higher than 1/25, but the flash does not
fire simultaneously.
« If the flash fires, it is possible to record
only 1 frame.
* When quality is set to TIFF [fn], itis not
possible to use the burst mode.
e When quality is set to fine [PH], it is
possible to record in burst mode a
maximum of 4 frames.
* In motion image mode [E8], the burst
mode cannot be used.
* Only the first picture recorded is
displayed on the LCD monitor.

Advertisement

Table of Contents
loading

Table of Contents