FP Postbase Mini Operator's Manual page 15

Installation and commissioning
PostBase Mini then asks you to insert the
ink cartridge.
• Lift up the operating panel as far as it goes.
You can feel it engage.
• Remove the ink cartridge from the packing.
• Remove the nozzle protection.
For details, please refer to the instruction
leaflet that comes with every cartridge.
• Hold the ink cartridge so the contacts are
facing to the front of the franking machine.
• Insert the ink cartridge into the socket.
• Push the ink cartridge all the way down
until the little green latch locks it into place
with an audible click. While doing so, you
will have to overcome a slight spring pres-
sure.
The illustration on the left shows the
correct position of the latch.
15