Milesight MS-N1009-UT User Manual page 89

Step4. Configure IP Channel
After successfully adding the channel, click
Select [Parameters] page to re-edit this channel parameters. Click [Save] to save the configuration
You can delete this channel by clicking
delete.
Note:
The user name and password entered here are the default user name and password. The management port is
80 and the default Transport protocol is UDP.
File Format：MS-QR-JS-04 Rev1.0
F-4.5.11
to re-edit the channel info, address, and password, etc.
F-4.5.12
F-4.5.13
, or you can select multiple devices and then click
Durability Date：1Years
to
84