Milesight MS-N1009-UT User Manual page 73

Note:
1. If the NVR firmware version out of the factory is xx.7.0.6 or above, the default user name
is "admin" and the default password is "ms1234";
2. If the NVR firmware is upgraded to xx.7.0.6 or above from a lower version, the default
password will turn to "ms1234" after a reset, or it will keep the old default password
"123456";
3. If the NVR firmware version is below xx.7.0.6, the default user name is "admin" and the
default password is "123465".
Step2. Set user privileges
Select the user that has been added and click [limit] button to enter user privilege menu.
Step3. Click to delete a user.
File Format：MS-QR-JS-04 Rev1.0
F-3.8.16
F-3.8.17
Durability Date：1Years
68