Milesight MS-N1009-UT User Manual page 103

4.5.4.5 User
Step1. Enter user setting menu by clicking SettingsSystemUser.
Note:
1. If the NVR firmware version out of the factory is xx.7.0.6 or above, the default user name is "admin" and
the default password is "ms1234";
2. If the NVR firmware is upgraded to xx.7.0.6 or above from a lower version, the default password will turn
to "ms1234" after a reset, or it will keep the old default password "123456";
3. If the NVR firmware version is below xx.7.0.6, the default user name is "admin" and the default password
is "123465".
Step2. Add new user.
Click [Add] to enter add user menu, input information for the new user, select user level and set user privileges,
then click [OK] to save settings.
File Format：MS-QR-JS-04 Rev1.0
F-4.5.40
F-4.5.41
F-4.5.42
Durability Date：1Years
98