Safety Instruction - Milesight MS-N1009-UT User Manual

These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss. The precaution measures are divided into "Warnings"
and "Cautions"
Warnings: Serious injury or death may be caused if any of these warnings is
neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings: Please follow these safeguards to
prevent injury or death.
Warnings
 This installation must be conducted by a qualified service person and should
strictly comply with the electrical safety regulations of the local region
 To avoid risk of fire and electric shock, do keep the product away from rain
and moisture
 Do not touch components such as heat sinks, power regulators, and
processors, which may be hot
 Source with DC 12V or PoE
 Please make sure the plug is firmly inserted into the power socket
 When the product is installed on a wall or ceiling, the device should be firmly
fixed
 If the product does not work properly, please contact your dealer. Never
attempt to disassemble the camera by yourself
Cautions
 Make sure that the power supply voltage is correct before using the camera
 Do not store or install the device in extremely hot or cold temperatures,
dusty or damp locations, and do not expose it to high electromagnetic
radiation
 Only use components and parts recommended by manufacturer
 Do not drop the camera or subject it to physical shock
 To prevent heat accumulation, do not block air circulation around the
camera
 Laser beams may damage image sensors. The surface of image sensors

Safety Instruction

Cautions: Please follow these safeguards to
prevent potential injury or material damage.