Milesight MS-N1009-UT User Manual page 53

Note:
Time period cannot overlay with each other
Step6. Click [Copy] to copy the motion detection schedules to other weekdays.
F-3.5.15
Step7. Select actions you want when motion is detected
[Trigger Alarm Output]: Select whether trigger the alarm output or not when video loss is
detected.
[Audible Warning]: Trigger an audible beep when video loss is detected
[Email Linkage]: Send video loss note to specified email address when video loss is
detected.(Please refer to 3.8.2.4 Mail configuration for mail address setting)
[Trigger Interval]: Set the interval between two events.
Note:
These actions will only take response according to effective time you choose.
Step8. [Trigger Channels Record]: Select channels to trigger for recording when motion is
detected by checking the check-boxes under the desired channels. Please make sure other
channels has setup motion recording schedule. (Refer to 3.4 Record settings)
Step9. Click [Apply] or [OK] to confirm settings. Repeat above steps to other channel. Or click
[Copy] to copy settings to other channel.
48
File Format：MS-QR-JS-04 Rev1.0 Durability Date：1Years