Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Milesight Lite UR32L
Summary of Contents for Milesight Lite UR32L
- Page 1 Industrial Router Lite Series UR32L Quick Start Guide...
- Page 2 Safety Precautions Milesight will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide. The device must not be modified in any way. Do not place the device close to objects with naked flames.
- Page 3 Revision History Date Doc Version Description Apr. 13, 2021 V 1.0 Initial version July 22, 2021 V 1.1 Delete Ethernet Cable...
-
Page 4: Table Of Contents
Contents 1. Packing List................................5 2. Hardware Introduction............................5 2.1 Overview................................5 2.2 Dimensions..............................6 2.3 LED Indicators..............................6 2.4 Reset Button..............................7 2.5 Ethernet Port Indicator..........................7 3. Hardware Installation.............................. 7 3.1 SIM Card Installation.............................7 3.2 Antenna Installation............................7 3.3 Router Installation............................8 3.3.1 Wall Mounting.............................8 3.3.2 DIN Rail Mounting.......................... -
Page 5: Packing List
1. Packing List Before you begin to install the UR32L router, please check the package contents to verify that you have received the items below. 1 × Magnetic Cellular 1 × UR32L 1 × Power Adapter 1 × DIN Rail Kit Antenna 4 ×... -
Page 6: Dimensions
2.2 Dimensions (mm) 2.3 LED Indicators Indication Status Description The power is switched off POWER Power Status The power is switched on Static: Start-up Green Light SYSTEM System Status Blinking slowly: the system is running properly Red Light The system goes wrong SIM is registering or fails to register (or there are no SIM cards inserted) Blinking slowly: SIM has been registered and is ready for... -
Page 7: Reset Button
2.4 Reset Button Reset button is under the SIM slots. Description Function SYSTEM LED Action Blinking Press and hold the reset button for more than 5 seconds. Static Green → Reset Release the button and wait. Rapidly Blinking Off → Blinking The router is now reset to factory defaults. -
Page 8: Router Installation
3.3 Router Installation The router can be placed on a desktop or mounted to a wall or a DIN rail. 3.3.1 Wall Mounting (Measured in mm) Use 4 pcs of M3 × 6 flat head Phillips screws to fix the router on the wall. Recommended torque for mounting is 1.0 N·m, and the maximum allowed is 1.2 N·m. -
Page 9: Log In The Web Gui Of Router
4. Log in the Web GUI of Router Please connect PC to LAN port of UR32L router. PC can obtain an IP address, or you can configure a static IP address manually. The following steps are based on Windows 10 operating system for your reference. - Page 10 D. Enter the username, password, and click "Login". If you enter the username or password incorrectly more than 5 times, the login page will be locked for 10 minutes. E. When you login with the default username and password, you will be asked to modify the password. It’s suggested that you change the password for the sake of security.
-
Page 11: Network Configuration
5. Network Configuration This chapter explains how to connect UR32L to network via WAN connection or cellular. 5.1 Ethernet WAN Configuration A. Go to “Network > Interface > Port” to change LAN1 to WAN port. B. Go to “Network > Interface > WAN” to select connection type and configure WAN parameters, click “Save &... -
Page 12: Cellular Connection Configuration
5.2 Cellular Connection Configuration A. Go to “Network > Interface > Cellular > Cellular Setting” to configure APN, PIN code or other cellular info, click “Save” and “Apply” to save the configuration. B. Go to “Network > Interface > Link Failover” to enable SIM and rise link priority. - Page 13 C. Click to configure ICMP ping detection information. D. Click “Status > Cellular” to view the status of the cellular connection. If it shows “Connected”, it means SIM has dialed up successfully. On the other hand, you can check the status of SIM indicator. If it keeps on green light statically, it means SIM has dialed up successfully.
Need help?
Do you have a question about the Lite UR32L and is the answer not in the manual?
Questions and answers