Table of Contents
Advertisement
Load default settings
This option allows you to reset the setup utility configurations back to the system
default values. This is useful when trying to diagnose configuration errors (see
"Configuration errors" on page 105) in the system. Loading defaults will reset the
administrator password to the default value (IBMNCD), and will also reset all
customized settings to their default values. Refer to "Changing the administrator
password" on page 58 to reconfigure the administrator password.
Note:
v If you load defaults from the setup utility and then power off, you will see the
auto-configuration menu.
v If you load defaults from the setup utility and then save and exit, the Network
Station will reboot and come up in the setup utility; and if it boots, it will stay in the
setup utility after power off.
Chapter 9. Configuring the Network Station from the BIOS setup utility
63
Advertisement
Table of Contents
