IBM 8364 E series User Manual page 71

The system administrator may choose to change the administrator password
on the Network Station for security reasons. Follow the procedure below to
change the administrator password.
1. Power on the system.
2. Press the F1 key during the IBM Network Station logo display, and after
the keyboard LEDs have flashed.
Note: Pressing F1 during the system's keyboard test causes a false 301
Keyboard Error to display, and a prompt for the administrator
password to appear.
3. Type the current administrator password when prompted.
Note: If you do not know the current administrator password, refer to
"Clearing the administrator password and CMOS, creating a
recovery CompactFlash card, and reading a CompactFlash card" on
page 24 for the procedure to reset the administrator password to
the system default.
4. Press the Enter key.
5. Choose "System Security" from the main setup utility screen.
6. Choose "Administrator Password" from the "System Security" screen.
7. Enter the new administrator password in the space that is provided.
8. Enter the new administrator password a second time in the space that is
provided.
9. Choose "Change Administrator Password" from the "Administrator
Password" screen.
10. Exit the setup utility.
Chapter 9. Configuring the Network Station from the BIOS setup utility
59