1. Manuals
  2. Brands
  3. IBM Manuals
  4. Network Router
  5. J11M
  6. Quick start manual

IBM J11M Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IBM Ethernet Router
J11M Quick Start
GA32-0660-00

Advertisement

Table of Contents
loading

Related Manuals for IBM J11M

Summary of Contents for IBM J11M

  • Page 1 IBM Ethernet Router J11M Quick Start GA32-0660-00...
  • Page 2 Order publications through your IBM representative or the IBM branch office serving your locality. © Copyright International Business Machines Corporation 2009.

  • Page 3: Table Of Contents

    IBM Ethernet Router J11M Quick Start This document describes how to install the IBM Ethernet Router J11M. Contents Copyrights, Trademarks, and Notices ..............2 Copyrights ....................2 Trademarks ....................2 Notices ......................3 Quick Start Description ...................5 Step 1: Prepare the Site ...................6 Rack-Mounting Requirements ..............6 Tools Required ..................7...

  • Page 4: Contents Copyrights, Trademarks, And Notices

    IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program or service is not intended to state or imply that only IBM s product, program or service may be used. Any functionally equivalent product, program or service that does not infringe any of IBM s intellectual property rights may be used instead of the IBM product, program or service.

  • Page 5: Notices

    Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe on any IBM intellectual property right may be used instead.
  • Page 6 IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.

  • Page 7: Quick Start Description

    IBM Ethernet Router J11M Hardware Guide at http://www.elink.ibmlink.ibm.com/publications/servlet/pbi.wss The IBM Ethernet Router J11M with the standard cable manager is 16 rack units (U) tall, or 21 U with the extended cable manager. Three routers with the standard cable manager, or two routers with the extended cable manager, can be stacked in a single floor-to-ceiling open rack, for increased port density per unit of floor space.

  • Page 8: Step 1: Prepare The Site

    IBM Ethernet Router J11M Quick Start Step 1: Prepare the Site Figure 1: J11M Rack Clearance and Router Dimensions Rack-Mounting Requirements You can install the router in a four-post open rack or open cabinet or an open-frame rack. An empty router weighs 150 lbs (68 kg). A fully-populated router weighs 350 lbs (158.8 kg).

  • Page 9: Tools Required

    Step 1: Prepare the Site The rack rails must be spaced widely enough to accommodate the router chassis's external dimensions: 27.75 in. (70.49 cm) high, 23.0 in. (58.42 cm) deep, and 17.37 in. (44.11 cm) wide. The outer edges of the mounting brackets extend the width to 19 in.

  • Page 10: Step 2: Install The Mounting Hardware

    Install the Mounting Hardware in a Four-Post Open Rack or Open Cabinet To install the mounting shelf: On the front rack rails, install cage nuts in the holes specified in the IBM Ethernet Router J11M Hardware Guide for the large shelf and the spacer bars.

  • Page 11: Install The Mounting Hardware In An Open-Frame Rack

    On the rear of each rack rail, partially insert a mounting screw into the highest hole specified in the IBM Ethernet Router J11M Hardware Guide for the large shelf. Install the large shelf on the rack. Hang the shelf over the mounting screws using the keyhole slots located near the top of the large shelf flanges.

  • Page 12: Step 3: Install The Router

    IBM Ethernet Router J11M Quick Start Figure 3: Mount Hardware for an Open-Frame Rack Step 3: Install the Router Because of the router's size and weight, you must install the router using a mechanical lift. To install the lift: Remove Components on page 10...
  • Page 13 Step 3: Install the Router Figure 4: Components to Remove from the Front of the IBM Ethernet Router J11M Figure 5: Components to Remove from the Rear of the IBM Ethernet Router J11M To remove the components from the router: Slide each component out of the chassis evenly so that it does not become stuck or damaged.

  • Page 14: Install The Router Using A Lift

    Ensure that the rack is in its permanent location and is secured to the building. Ensure that the installation site allows adequate clearance for both airflow and maintenance. For details, see the IBM Ethernet Router J11M Hardware Guide. Load the router onto the lift, making sure it rests securely on the lift platform (see Figure 6 on page 12).

  • Page 15: Reinstall Components

    Step 4: Connect External Devices and DPC or PIC Cables Lift the chassis approximately 0.75 in. above the surface of the mounting shelves and position it as close as possible to the shelves. Carefully slide the router onto the mounting shelves so that the bottom of the chassis and the mounting shelves overlap by approximately 2 inches.

  • Page 16: Connect To A Network For Out-Of-Band Management

    Connect the DPC or PIC Cables Have ready a length of the type of cable used by the DPC or PIC. For cable specifications, see the IBM j-type m-series Ethernet routers DPC Guide or IBM j-type m-series Ethernet routers PIC Guide.

  • Page 17: Step 5: Connect Ground And Power Cables

    Step 5: Connect Ground and Power Cables DANGER: Do not look directly into a fiber-optic transceiver or into the ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cable connected to a transceiver emit laser light that can damage your eyes. CAUTION: Do not leave a fiber-optic transceiver uncovered except when inserting or removing cable.

  • Page 18: Connect Power To An Ac Router

    Connect Power to an AC Router Locate the power cords shipped with the router, which should have a plug appropriate for your geographical location (see the IBM Ethernet Router J11M Hardware Guide). Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  • Page 19 Step 5: Connect Ground and Power Cables Figure 8: Connect DC Grounding and DC Power Cables Ensure that the voltage across the DC power source cable leads is 0 V and that there is no chance that the cable leads might become active during installation. Secure the power cable lugs to the terminal studs, first with the split washer, then with the nut.

  • Page 20: Step 6: Perform Initial Software Configuration

    IBM Ethernet Router J11M Quick Start NOTE: For information about connecting to DC power sources, see the IBM Ethernet Router J11M Hardware Guide. Loosen the captive screw on the cable restraint on the lower edge of the power supply faceplate.
  • Page 21 Step 6: Perform Initial Software Configuration [edit] root@# set interfaces fxp0 unit 0 family inet address address/prefix-length Configure the IP address of a backup router, which is used only while the routing protocol is not running. [edit] root@# set system backup-router address Configure the IP address of a DNS server.

  • Page 22: Safety Warnings

    CAUTION: See installation instructions before connecting the router. This is a summary of safety warnings. For a complete list of warnings for this router, including translations, see the IBM Ethernet Router J11M Hardware Guide at http://www.elink.ibmlink.ibm.com/publications/servlet/pbi.wss CAUTION: The intrabuilding port(s) of the router is suitable for connection to intrabuilding or unexposed wiring or cabling only.
  • Page 23 Read the installation instructions before you connect the router to a power source. Before installing the router, read the guidelines for site preparation in the IBM Ethernet Router J11M Hardware Guide to make sure that the site meets power, environmental, and clearance requirements for the router.

  • Page 24: Hardware Service And Support

    For information about which products are supported by Support Line in your country or region, go to the following Web site: www.ibm.com/services/sl/products For more information about the IBM Support Line and other IBM services, go to the following Web sites: www.ibm.com/services www.ibm.com/planetwide...
  • Page 25 Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
  • Page 26 Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu ® installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung der IBM verändert bzw.
  • Page 27 People’s Republic of China Class A Electronic Emission Statement Japan VCCI Class A ITE Electronic Emission Statement Korea Class A Electronic Emission Statement Taiwan Contact Information IBM Taiwan Product Service Contact Info: IBM Taiwan Corporation 3F, No 7, Song Ren Rd., Taipei Taiwan Tel: 0800-016-888...
  • Page 28 Your feedback is important in helping us provide the most accurate and high-quality information. If you have comments or suggestions for improving this document, send us your comments by e-mail to starpubs@us.ibm.com. Be sure to include the following: v Exact publication title...
  • Page 30 Part Number: 45W5528 Printed in USA GA32-0660-00...

Table of Contents