IBM 8364 E series User Manual page 95

Error code Error message
NSB61829 Token Ring error in full
duplex duplicate
address phase.
NSB61839 Token Ring error in
station query phase.
NSB61840 Error - open function
failure.
NSB61850 Error - signal loss.
NSB61860 Error - wire fault.
NSB61870 Error - ring speed
mismatch.
NSB61880 Error - time-out.
NSB61890 Error - ring failure.
NSB61900 Error - ring beaconing.
NSB61910 Error - duplicate MAC
address.
NSB61930 Error - remove received. Ensure that you are not blocked from
NSB61940 Error - no active
network monitor.
NSB61950 Error - active network
monitor contention.
Chapter 11. Identifying problems with hardware that is configured for NS Boot
What you should do
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
Adapter failure. Replace the Network
Station logic unit, or the PCI Token Ring
card (see "Chapter 2. Replacing Network
Station parts" on page 9).
Verify network connection.
Verify network connection.
Manually set the ring speed in the Local
(NVRAM) settings of the NS Boot utility,
or in the IBM Network Station Manager
program.
Adapter failure. Replace the Network
Station logic unit, or the PCI Token Ring
card (see "Chapter 2. Replacing Network
Station parts" on page 9).
Verify that there are no problems with
the network, and restart the Network
Station.
Verify that there are no problems with
the network, and restart the Network
Station.
Verify that the MAC address of the
Network Station is correctly defined (see
"Changing the local MAC address" on
page 49).
entering the ring.
Manually set the ring speed in the Local
(NVRAM) settings of the NS Boot utility,
or in the IBM Network Station Manager
program.
Verify that there are no problems with
the network, and restart the Network
Station.
83