Changing the fast boot setting
You can configure this option from the Service Aids menu. To change the fast
boot setting, perform the following procedure:
__ 1. Enter the NS Boot utility by powering on the Network Station and
__ 2. Select Service aids, and press Enter.
__ 3. Select Change the fast boot setting, and press Enter.
__ 4. Select Enabled or Disabled, and press Enter.
Changing the retry settings
You can configure this option from the Service Aids menu. To change the
retry settings, perform the following procedure:
__ 1. Enter the NS Boot utility by powering on the Network Station and
__ 2. Select Service aids, and press Enter.
__ 3. Select Change retry settings, and press Enter.
__ 4. Configure the retry settings, and press Enter to save your changes.
Changing the NS Boot themes setting
You can configure this option from the Service Aids menu. To change the NS
Boot theme settings, perform the following procedure:
__ 1. Enter the NS Boot utility by powering on the Network Station and
__ 2. Select Service aids, and press Enter.
__ 3. Select Change NS Boot theme settings, and press Enter.
__ 4. Select an NS Boot theme, and press Enter to save your changes.
Loading the factory defaults
__ 1. Enter the NS Boot utility by powering on the Network Station and
__ 2. Select Service aids.
__ 3. Press Enter.
__ 4. Select Load factory defaults, and press Enter.
50
IBM Network Station
pressing Esc during the startup sequence.
pressing Esc during the startup sequence.
pressing Esc during the startup sequence.
pressing Esc during the startup sequence.
This restarts the Network Station.