IBM 8364 E series User Manual page 56

Note: This procedure does not apply to Network Stations that have NS Boot
1. Select Configure network settings from the NS Boot Main Menu, and
2. Set Local (NVRAM) to First in the Network priority field. You can
3. Type the IBM Network Station IP Address in the appropriate field on
4. Type the Gateway IP Address in the appropriate field on menu 1 of 4.
5. Type the Subnet mask in the appropriate field on menu 1 of 4.
6. Type at least one Boot file server IP address in the appropriate fields on
7. Type the IP address of the boot file server in the appropriate field.
8. Cycle through the Boot file server directory and file name, until you
9. Refer to the following table and type the correct path for your server
For this
platform:
AS/400
Windows NT
RS/6000
10. If you are not sure what protocol you have configured your server for,
11. Press F3 to save your changes.
12. Restart the Network Station to complete the manual NS Boot version
44
IBM Network Station
version H2033190 (03/31/99). You must manually update Network
Stations that have NS Boot version H2033190 (03/31/99) before you
can perform the procedures in this chapter. See "Appendix A. Updating
the NS Boot version H2033190 (03/31/99)" on page 111.
press Enter.
select a boot method priority (first, second, and third) for the Network
Station to follow during startup.
Note: You can only set one boot option to First at a time. Disable DHCP
and BOOTP if you do not want them prioritized.
menu 1 of 4.
menu 2 of 4.
have selected the empty field.
platform in the empty Boot file server directory and file name field:
Type this path:
/QIBM/ProdData/NetworkStationV2/x86/proms/bflash.2800
/NetworkStationV2/prodbase/x86/proms/bflash.2800
/usr/NetworkStationV2/prodbase/x86/proms/bflash.2800
select TFTP as your primary Boot file server protocol.
update.