Factory Default Configuration - IBM ADSL Bridge/ Router Heritage User Manual

3-2

3.1 Factory default configuration

The Router is shipped with factory default settings. You may or may not
need to change them depend on what kind of network that your Router is
going to be installed.
Configuration item
Ethernet Interface IP address
Network Mask
xDSL interface IP address
Network Mask
ATM VPI/VCI number
Data Encapsulation Protocol
Machine Name
Domain name
DHCP Server
DHCP Client
DNS Relay
NAT
RIP
IP filtering
Bridge filtering
Spanning Tree
Telnet login password
SNMP access password
Basic Configurations
Default settings of xDSL Router
192.168.7.1
255.255.255.0
None
None
0/32
RFC1483
DSL
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
admin
admin