Table of Contents
Advertisement
Select the Other option by pressing 2 immediately after the Select
Operating System screen displays.
Notes:
a. If you selected the WSOD option by mistake, perform the procedure in
b. If you selected the Auto option by mistake, restart the Network Station
2. If you do not see the Select Operating System screen, restart the Network
Station and wait for the IBM logo to display:
v If the IBM logo displays in the upper left corner of the screen, press Esc
v If the IBM logo displays in the upper right corner of the screen, press F1
3. If you are using NVRAM settings to boot your Network Station, continue
with the procedure, "Updating the H2033190 (03/31/99) NS Boot version
from NVRAM settings".
If you are booting from a DHCP server, continue with the procedure,
"Updating the H2033190 (03/31/99) NS Boot version from a DHCP
server" on page 114.
Updating the H2033190 (03/31/99) NS Boot version from NVRAM settings
1. From the Network Computer Setup Utility screen, press F3 to select the
112
IBM Network Station
Select Operating System
1. WSOD
2. Other
3. Auto
"Switching from the BIOS for WorkSpace On-Demand configuration"
on page 41.
and continue with step 1 on page 111.
during the startup sequence and continue with step 3.
during the startup sequence.
A password prompt displays if you press F1 before the Network Station
completes the power-on sequence. If no password prompt displays,
restart the Network Station and repeat this step.
Once the password prompt displays, continue with step 3 of the
procedure "Switching from the BIOS for WorkSpace On-Demand
configuration" on page 41.
Set Network Parameters option:
Advertisement
Table of Contents
