IBM 8364 E series User Manual page 91

Error code Error message
NSB12510 Not able to access
nonvolatile memory.
NSB12520 Setting nonvolatile
memory to
manufacturing defaults.
NSB12530 Detected reset jumper.
NSB12540 New nonvolatile
memory structure
detected.
NSB21500 Audio failure.
Input, keyboard and mouse messages (NSB3xxxx, NSB31xxx, and NSB32xxx)
NSB30500 No input device
detected. NS Boot will
continue in 10 seconds.
NSB31500 Keyboard did not
respond.
NSB31510 Keyboard controller did
not respond.
NSB31520 Keyboard was not
recognized.
NSB32500 Mouse did not respond. Check the mouse cable connection.
NSB40500 USB failure.
NSB40510 USB initialization
failure.
Chapter 11. Identifying problems with hardware that is configured for NS Boot
What you should do
Replace the Network Station logic unit
(see "Chapter 2. Replacing Network
Station parts" on page 9).
Re-enter NS Boot configuration data, if
different from the default values.
The password has been cleared,.
Re-enter NS Boot configuration data, if
different from the default values.
Audio messages (NSB21xxx)
Replace the Network Station logic unit
(see "Chapter 2. Replacing Network
Station parts" on page 9).
Check the keyboard and mouse cable
connections.
Check the keyboard cable connection.
Check the keyboard and mouse cable
connections. If the symptom remains,
replace the Network Station logic unit
(see "Chapter 2. Replacing Network
Station parts" on page 9).
Check the keyboard cable connection.
USB messages (NSB4xxxx)
Disconnect any USB devices from the
Network Station and restart the system.
If the symptom remains, replace the
Network Station logic unit (see
"Chapter 2. Replacing Network Station
parts" on page 9).
Disconnect any USB devices from the
Network Station and restart the system.
If the symptom remains, replace the
Network Station logic unit (see
"Chapter 2. Replacing Network Station
parts" on page 9).
79