Over Terminal - CipherLab 8001 User Manual

36 8001/8300/8500 Ethernet Cradle User Guide
4. During downloading, LED 1 and LED 2 will be flashing by turns on the 8001/8300
Ethernet Cradle. Then, they will become solid red for approximately 3 seconds.
5. The downloading process will not be completed until LED 1 turns solid red and LED 2
goes off.
Note: There is no such LED indication on the 8500 Ethernet Cradle.
6. The cradle will reboot itself.
Warning:

5.2 Over Terminal

1. Download the latest version of Ethernet Cradle firmware from our website to a specific
terminal (8000/8300/8500). The terminal will display a selection menu.
2. Disconnect the power supply cord to the cradle.
3. Press the "IP Reset" switch while re-connecting the power cord to the cradle.
4. Seat the terminal in the cradle.
5. From the terminal menu, select "Kernel (version x.xx)" to download new kernel or
select "User (version x.xx)" to download new user program.
After the "Download Successfully" message appears on your computer, wait for
approximately 5 seconds.
DO NOT disconnect the power to the cradle before the downloading
process is completed.