Led Setting (Data/Modem Mode); Network Rx/Tx Status (Default); Ir Rx/Tx Status - CipherLab 8001 User Manual

2.2 LED Setting (Data/Modem Mode)

Select "2" from the Main Menu. The following submenu will be displayed for configuring
LED indicators setting.
Note: This setting applicable to Data Mode or Modem Mode on the 8001/8300 Ethernet
For the 8001/8300 Ethernet Cradle, the 2
transmission activity occurs, regardless of which working mode you select. However, it can
be further configured here, when in
transmission over Ethernet or IR.

2.2.1 Network Rx/Tx Status (default)

By default, the 2

2.2.2 IR Rx/Tx Status

You may change the setting so that the LED flashes to indicate data transmission occurs
over IR port.
Cradle only.
nd
LED flashes to indicate data transmission occurs over Ethernet port.
Chapter 2 Configuring the Ethernet Cradle
nd
LED indicator (middle) will flash when data
Data Mode or Modem
19
Mode, to indicate data