CipherLab 8001 User Manual page 29

Transmit Line Terminator
By default, this setting is enabled so that the Line Terminator character will be
included in the TCP/IP packet and sent out.
To disable it, type "3 0" and press [Enter].
The Line Terminator character will be discarded from the received buffer before
transmission.
Line Terminator
Specify a Line Terminator character from 00h to FFh.
By default, the Line Terminator is "0Dh" (Carriage Return).
Below are examples for setting a new Line Terminator character.
- To set "$" as the Line Terminator, type "4 24" and press [Enter].
- To set "A" (41h) as the Line Terminator, type "4 41" and press [Enter].
Chapter 2 Configuring the Ethernet Cradle 23