Working Mode; Data Mode; Transparent Mode - CipherLab 8001 User Manual

2.4 Working Mode

Select "4" from the Main Menu. The following submenu will be displayed for selecting a
working mode. The cradle supports three working modes.
Note: By default, the cradle is set to Modem Mode.

2.4.1 Data Mode

If you select
LED Indicator Setting (for 8001/8300 Ethernet Cradle only)
Connection Settings
Working Type

2.4.2 Transparent Mode

If you select
Menu, such as Local IP, Subnet Mask, Router IP, etc. Either the terminal or the remote
computer will control and handle data.
Data Mode, proceed to configure the following items in the Main Menu:
Transparent Mode, you only need to configure general settings in the Main
Chapter 2 Configuring the Ethernet Cradle 25