16
8001/8300/8500 Ethernet Cradle User Guide
5. If you are satisfied with the new settings, select "7" from the Main Menu. The Ethernet
Cradle will reboot and re-initialize with the new settings.
Main Menu Options
1. Set Local IP, Subnet Mask &
Default Router IP
2. Set LED Indicator Setting
(8001/8300 Ethernet Cradle only)
3. Set Connection Settings
4. Set Working mode
5. Set Working type
6. Reset Configuration to Default
7. Set Modem Configuration
8. Save and Exit
0. Exit without Saving
Note: In the sample screenshots, the default settings are highlighted in red box.
Applicable to Working Mode
Any
Data mode or Modem mode
Data mode
Modem mode: Timer only
Select working mode
Data mode
Any
Modem mode
Any
Any
Default Settings
Check local IP if you don't
remember
Default to Network Rx/Tx
Status
Default to TCP Server...
Default to Modem mode
Default to Work Offline
Default to 10 seconds for
dialing time-out and 30
seconds for idle time-out