CipherLab 8001 User Manual page 27

Connection Type
The cradle can be configured as a server or client, and you can choose to use TCP or
UDP as the transport layer protocol of data communications.
By default, the connection type of the cradle is TCP Server.
To change the connection type, e.g. to UDP SERVER, type "1 2" and press [Enter].
Connection Type:
0= TCP Server
1= TCP Client
2= UDP Server
3= UDP Client
Local Port
When the cradle is configured as a TCP server or UDP server, you have to define a
port number for the clients to connect.
Note: Port 8000 is reserved for the use of configuring the cradle over Ethernet connection.
Port 3000 is reserved for downloading, such as a firmware download.
Remote IP & Port
When the cradle is configured as a TCP client or UDP client, you have to define the
remote IP and port number for setting up a connection.
For example, type "3 192.168.6.36" and press [Enter].
Chapter 2 Configuring the Ethernet Cradle
Local Port Remote IP Address
Available N/A
N/A Available
Available N/A
N/A Available
21
Remote Port
N/A
Available
N/A
Available