Maintenance; Maintaining The Unit; Cleaning The Unit And The Accessories - Chattanooga Group Intelect Transport Combo User Manual

MAINTENANCE

MAINTAINING THE UNIT

Cleaning the Unit and the Accessories

With the unit disconnected from the power source, clean the unit with a clean, lint free cloth moistened with water and mild antibacterial
soap. If a more sterile cleaning is needed, use a cloth moistened with an antimicrobial cleaner.
Do not submerge the unit in liquids. Should the unit accidentally become wet, contact the dealer or Chattanooga Group Service
Department immediately. Do not attempt to use a unit that has been wet inside until inspected and tested by a Service Technician Certified
by Chattanooga Group.
To clean the Lead Wires, disconnect them from the unit and wipe down with a clean, lint free cloth moistened with water and mild
antibacterial soap.
To clean the optional reusable carbon electrodes, remove them from the Lead Wires and wipe down with isopropyl alcohol. Repeat this
procedure for the sponges as well.
The following items should be checked at least monthly to ensure proper operation of this unit:
•
Power cord and plug: Check to make sure the cord is not frayed, kinked, and does not have torn or cut insulation.
•
Applicator cable: Check to make sure the cable is flexible, free of kinks, not frayed, and the insulation is intact.
•
Sound head face: Check to see that there is no build-up of gel or foreign material on the aluminum face.
NOTE:
NOTE:
The sound head must be cleaned with alcohol between each therapy session. The aluminum surface
may be disinfected with alcohol, but avoid the plastic area.
The unit must be recalibrated annually. The unit was calibrated during the manufacturing process and
is ready to be placed into service upon delivery.
82
Intelect® Transport Combo