OPERATION
STARTING, STOPPING, AND INTERRUPTING ELECTROTHERAPY CONTINUED
3.
Connect the Lead Wires to the appropriate electrodes.
To see a list of recommended electrodes and their preparation, see pages 38-41.
NOTE: Do not use unnecessary force to connect the electrodes to the lead wires.
4.
Place the self adhesive electrodes on the sites prescribed by a qualified practitioner.
Make sure you press them firmly on the patient's skin to ensure good conductivity.
5.
Depending on the type of waveform you intend to use and the number of patients
you intend to treat, insert the Lead Wire into Channel 1, Channel 2, or both Lead
Wire Connections on the Accessory Panel.
44
Intelect® Transport Combo
Need help?
Do you have a question about the Intelect Transport Combo and is the answer not in the manual?