Chattanooga Group Intelect Transport Combo User Manual page 60

OPERATION
CREATING A USER PROTOCOL FOR ELECTROTHERAPY CONTINUED
7. Press the Up Arrow and Down Arrow buttons to highlight any unused user protocol.
If you select the Save as Default protocol, this will become the protocol displayed
when the waveform is selected on the Waveform screen.
8. Press the Enter button to accept the highlighted selection and save your custom
protocol.
The User Protocol Confirmation window displays to indicate that the protocol is now
saved as the number you specified.
9. Press any button on the Operator Interface.
The Parameter screen displays and your new protocol is now saved.
57
Intelect® Transport Combo