Table of Contents
Advertisement
SETUP
INSTALLING THE BATTERY PACK CONTINUED
CHARGING THE BATTERY PACK
The battery pack is automatically charged by the unit whenever there is mains power connected. Charging may be interrupted during
operation of the unit by the control circuitry to limit total power consumption. A fully charged battery will provide 2-5 hours of treatment
depending on the applicator and the pulsed mode used.
NOTE: Even when the battery pack is connected, the unit will default to mains power when plugged in.
USING THE BATTERY PACK
To save battery power, the Intelect Transport Combo is equipped with a "power off" function. This function is activated when the unit is
powered on and has been left idle for approximately 5 minutes, at which time the unit powers off. To restore power, press the Power On/Off
button.
5.
Replace the battery access door and re-tighten the screw using the screwdriver.
6.
Reverse the steps in this section in order to remove the battery pack.
37
Intelect® Transport Combo
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Intelect Transport Combo and is the answer not in the manual?