Patient Preparation; Electrotherapy Patient Preparation; Electrode Placement - Chattanooga Group Intelect Transport Combo User Manual

PATIENT PREPARATION

ELECTROTHERAPY PATIENT PREPARATION

Electrode Placement

Use the following guidelines when preparing patients for
electrotherapy:
• Examine the skin for any wounds and clean the skin.
• Apply the electrodes to the treatment area.
• Ensure the electrodes are applied securely to the skin.
• Ensure good contact between each electrode and the skin.
• Check the electrode contact regularly during the treatment.
• Examine the skin again after the treatment.
• Choose electrodes that fit the anatomy.
• Follow electrode manufacturer instructions.
•
Keep electrodes separated during treatment. Electrodes in contact
with each other could result in improper stimulation or skin burns.
•
Output current density is inversely related to electrode size (i.e.,
the larger the electrode, the lower the current density). Improper
application may result in patient injury. If any question arises as to
the proper electrode size, consult a licensed practitioner prior to
therapy session.
•
Powered muscle stimulators should be used only with the leads and
electrodes recommended for use by the manufacturer.
38
Intelect® Transport Combo