• Rapid increases in ROM can cause complications. do so could result in electrical shock or personal injury. • OptiFlex is not to be used in the presence of flammable anesthetic • DO NOT use OptiFlex while smoking or around open flame.
OptiFlex lessens the adverse effects of immobilization and trauma on the joint. OptiFlex is a prescription device used under the supervision or by the order of a physician or other licensed healthcare provider.
1. Place OptiFlex unit on a solid, flat surface. turn power switch OFF and have authorized personnel check the unit. 2. Attach the Soft Goods to the carriage of the OptiFlex by using the instructions provided with the Soft Goods. CAUTION 3.
Allows user to program carriage treatment parameters. to stop at both the extension and flexion angle for the COMFORT ZONE ™ time programmed. Temporarily decreases the flexion ROM when discomfort EMERGENCY STOP/START is experienced. Starts or Stop treatment OPTIFLEX USER MANUAL...
PENDANT FUNCTIONS All user input and feedback is provided through the pendant. The following are descriptions of each button provided with OptiFlex ® Extension: View and modify the extension angle parameter. How to use: To view the extension angle, press and hold the EXTENSION button.
Page 8
P. was pressed. The Comfort Zone Flexion Angle is five degrees less than P = Programmed Flexion angle. the angle where the button was pressed. Once five cycles are S = Start/Finish. OPTIFLEX USER MANUAL...
Page 9
FAST BACK OSCILLATION ZONE Speed = 60°/min. F = Programmed Flexion Angle carriage will move at the slower of 75°/min and half of the Programmed E = Programmed Extension Angle Speed while in the OSCILLATION ZONE ROM OPTIFLEX USER MANUAL...
Page 10
Day 2 Day 3 Day 4 Day 5 Day 6 Day 7 angle will automatically deactivate this mode. I = Initial Knee Flexion ROM F = Final Knee Flexion ROM ROM = I + D (n- ) x 5 where n is the number of days of therapy OPTIFLEX USER MANUAL...
Language Selection To select display language, press and hold the MODE and EXTENSION buttons simultaneously for 3 seconds. Use and arrows to select desired language and then press MODE to accept. OPTIFLEX USER MANUAL...
USER MAINTENANCE To clean OptiFlex ® , turn unit off and unplug the power supply. Clean OptiFlex with a damp cloth. DO NOT use abrasive cleaners. A small amount of mild household detergent may be used, if desired. Soft Goods may be laundered as required. However, the same Soft Goods should not be used from patient to patient.
Maximum Patient Weight: 350 Lbs. (159kg.) Calf Length Range: 10 to 23.5 in. (25.4 to 59.7 cm) (knee joint to sole of foot) Thigh Length Range: 12 to 19 in. (30.5 to 48.3 cm) (hip joint to knee joint) OPTIFLEX USER MANUAL...
Unit should be transported and stored within the following conditions: Temperature: 0 - 140°F (32° - 60°C) Humidity: 0 - 75% Relative Humidity SYMBOL DEFINITION Standby Power ON Standby Power OFF Emergency Stop Start Attention, Consult Type B Equipment Accompanying Documents OPTIFLEX USER MANUAL...
2. Comfort Zone button can only be used when ROM is greater than 30 degrees of Program- med Extension Angle. Note: Pendants of Optiflex units model 2000 and 2020 will not function on Model ® 2030 and 2060 OptiFlex units. OPTIFLEX USER MANUAL...
Product is returned to the Company or the dealer. Company or the dealer will ship the replacement or the repaired Product to the consumer's facility. All repairs must be performed by a service center authorized by Chattanooga Group, Inc. Any modifications or repairs performed by unauthorized centers or groups will void this warranty.
Page 17
The Company does not authorize any person or representative to create for it any other obligation or liability in connection with the sale of the Product. Any representation or agreement not contained in the warranty shall be void and of no effect. OPTIFLEX USER MANUAL...