Linking to external devices
Connecting Headphones, a Remote
Control or an External Monitor
Headphones
You can connect headphones (commercially-available) to the headphone output jack (3.5 mm
(0.14 q) diameter stereo mini jack).
≥ Sound is not output from the speaker when headphones are connected.
Remote control
You can connect a remote control (commercially-available) to either of the CAM REMOTE terminals
(FOCUS IRIS or ZOOM S/S).
≥ Connecting a remote control to the FOCUS IRIS terminal (3.5 mm (0.14 q) diameter mini jack)
allows you to remotely control the focus and iris.
≥ Connecting a remote control to the ZOOM S/S terminal (2.5 mm (0.1 q) diameter super-mini jack)
allows you to remotely control the zoom and start/stop recording.
≥ Do not connect any device other than a remote control to the CAM REMOTE terminals. Doing so
may change the image brightness or cause the image to be out of focus.
(When a remote control is connected to the FOCUS IRIS terminal)
≥ Priority for iris adjustment is given to the remote control. It is not possible to adjust the iris with the
multi-manual ring of this unit.
≥ It is not possible to use the remote control in the Intelligent Auto Mode.
Headphone output jack
A
FOCUS IRIS terminal
B
ZOOM S/S terminal
C
- 100 -
Need help?
Do you have a question about the HC-MDH3 and is the answer not in the manual?
Questions and answers