Usb Host Mode; Connecting To An External Monitor - Panasonic AG-DVX200EJ Operating Instructions Manual

USB Host Mode

If you connect an external media device, such as USB HDD or USB flash memory (commercially-
available) to this unit, you can copy motion pictures and still pictures recorded on this unit to the
external media device.
It can also play back the scenes and still pictures copied to the external media device.
≥ This unit supports USB 3.0.
Refer to the following support site for information about an external media device.
http://pro-av.panasonic.net/
(This Site is English only)
A USB 3.0 (Host mode)
B External media device (commercially-available)

Connecting to an external monitor

Connect an external monitor to output images.
≥ It is also possible to output 4:2:2 (10bit) images, depending on the [OUTPUT BITS] setting.
A Audio cable*
B HDMI cable*
*1 Use a commercially-available audio cable (3.5 mm diameter jack to RCA cable).
*2 Use a commercially-available High Speed HDMI cable.
If possible, we recommend using a cable with a length of 3 m or less.
*3 To connect to the SDI OUT or VIDEO OUT terminal, use a double-shielded BNC cable
equivalent to 5C-FB (commercially-available).
When connecting with an HDMI cable using an HDMI-to-DVI converter, etc., be sure to
connect the HDMI cable to the connector of this unit last.
Connecting the HDMI cable to the connector of this unit first may result in malfunction.
10
SQT1045 (ENG)



1
2

3
C BNC cable*
D External monitor

