Decline Call; Call Waiting; Conference - Siemens SX1 User Manual

SX1 K1 am-en, A31008-H6500-A5-1-7619 (29. July 2003, 19:32)

Decline call

E
Press the end key. The
caller will hear a "line
busy" tone.
The call may be
forwarded if this has been
set previously (p. 87).

Call waiting

You may need to register for this
service with your service provider
and set your phone accordingly
(p. 79).
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
the call.
You have the following options:
B
Press Call
to answer the waiting call.
The first call is put on
hold.
E Press briefly to end the
active call or hold down to
end both calls. Also:
OptionsKEnd all calls
If a second call is on hold:
B Press
Swap
between the calls.
Making a phone call
during the call
to switch

Conference

Call up to 5 parties one by one and
link them together in a phone
conference. Some of the functions
described may not be supported by
your service provider or may have to
be enabled specially.
You have established a connection:
M
Enter the new number, or
use
Contacts
D
Press the Call key.
The first call is
automatically put on
hold. When the new
connection is established,
add the first participant:
OptionsKConference
To add another person to
the conference, repeat
procedure and then
select:
OptionsKAdd to conference
21
(p. 29).