Security; Sx1 K1 Am-En, A31008-H6500-A5-1-7619 (29. July 2003 - Siemens SX1 User Manual

SX1 K1 am-en, A31008-H6500-A5-1-7619 (29. July 2003, 19:32)

General
The phone and SIM card are
protected against misuse by several
security codes.
Keep these confidential numbers in a
safe place where you can access them
again if required.
PIN
Protects your SIM card
code
(personal identification
number).
PIN2
This is needed to set the charge
code
detail display and to access
additional functions on special
SIM cards.
PUK
Key code. Used to unlock SIM
PUK2
cards after the wrong PIN has
been entered.

Security

Protects your phone. The
code
default code number is 12345.
You can change the security
code to any number.
To access code administration:
C
KSetupKSettingsKSecurity
KPhone and SIM
KSelect a function:
PIN code request
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorized use of the phone.
Security
PIN code
You can change the PIN to any
4-8 digit number you may find easier
to remember.
PIN2 code
(displayed only if PIN 2 is available)
Change PIN2 proceed as with
code.
Security code
You can change the security code to
any number (max. 5 digits). The
default code number is 12345.
If it is entered incorrectly three
times, all applications using this
code are barred. In this case, please
contact Siemens Service (p. 101).
Clear SIM card restriction
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
19
PIN