Add A Ring Tone; Sx1 K1 Am-En, A31008-H6500-A5-1-7619 (29. July 2003 - Siemens SX1 User Manual

SX1 K1 am-en, A31008-H6500-A5-1-7619 (29. July 2003, 19:32)

32
B
Press Quit
want to save the
recording.
When the voice tag is
saved, a symbol can be
seen next to the number
in the addressbook entry.
Apply
Press Voice dialing key on the side of
the phone.
A short signal sounds. Now say the
name. The phone answers with the
original voice tag and displays the
number and name. The number will
be dialed after 1.5 seconds.
B
Press Quit
want to make this call.
Editing options
Playback, Delete, Change
Note
To view the list of all defined voice tags:
Open Contacts:
OptionsKContacts infoKVoice tags
To hear a voice tag, select it:
OptionsKPlayback
Contacts
if you don't
if you don't

Add a ring tone

You can set a specific ring tone for
each entry or group. When that entry
or group member calls you, this ring
tone will be played.
Note
The phone number of the caller must be
sent with the call to become recognized
(see also Send my caller
Open Contacts and select the
required entry. Open the entry
or
move the joystick to the right to
open the Groups list.
then
OptionsKRinging tone
Select the required tone.
B
Press Select.
Note
All entries in a group get the same ring tone
you assign to the group, even if they had
their own one before.
ID, p. 79).