Switch On, Off / Pin Entry; Standby Mode - Siemens SX1 User Manual

SX1 K1 am-en, A31008-H6500-A5-1-7619 (29. July 2003, 19:32)

Switch on, off / PIN entry

18
Switch on, off
To switch on, hold down
E
On/Off/End key.
To switch off, hold down
On/Off/End key in standby
mode.
Enter PIN
The SIM card can be protected with a
4-8 digit PIN.
M
Enter your PIN code using
the number keys (shown
as a series of asterisks.
If you make a mistake
G
press
Press OK
B
input. Logging on to the
system will take a few
seconds.
Discolored or bright spots may appear on
the display. This is a design-related feature
of the screen.
.
to confirm the

Standby mode

When the name of the service
provider appears at the top of the
display, the phone is in standby mode
and ready for use.
The following indicators are shown
on the display:
Signal strength
_
Strong signal.
^
A weak signal reduces the call
quality and may lead to loss of
the connection. Change your
location.
Battery charge level
Shows the power of the battery in 7 steps,
e.g.:
d
Half full.
g
Full.