Siemens SX1 User Manual page 22

Hide thumbs Also See for SX1:
Table of Contents

Advertisement

SX1 K1 am-en, A31008-H6500-A5-1-7619 (29. July 2003, 19:32)
22
Private
You can have a private conversation
with one of the conference
participants:
OptionsKConferenceKPrivate
Select participant.
B
Press Private.
You can now have a private
discussion, while the rest of the
conference participants continue
talking.
To end the private conversation and
go back to the conference:
OptionsKAdd to conference
Drop
To remove one participant from the
conference:
OptionsKConference
KDrop participant
Select participant.
B
Press Drop.
Options during a call
Mute/Unmute, End active call, End all
calls, Hold/Unhold, Swap, Conference,
Add to conference, Private, Drop
participant, Transfer, Answer, Decline,
Send touch tones, Activate loudsp.
Making a phone call
Most relevant functions:
Mute/Unmute
Switch microphone on/off. If
switched off, the person on the
other end of the line cannot hear you
(muting)
Transfer
The original call is connected to the
second one. For you, both calls are
now ended
Send touch tones
You can enter control codes (digits)
during a call so that an answering
machine can be controlled remotely.
These digits are directly transmitted
as touch tones (control codes).
*
Press to produce a *.
#
Press to produce a #.
*
Press repeatedly to
produce "p" for a pause of
approx. 2 seconds, and
"w" if you want the
remaining sequence not
to be sent until you press
Send
again during the call.
B
Press
OK
Note
To store touch tones as an
see p. 29.
to send the tone.
Contacts
entry,

Advertisement

Table of Contents
loading

Table of Contents