Getting Started; Insert Sim Card/Battery - Siemens SX1 User Manual

Hide thumbs Also See for SX1:
Table of Contents

Advertisement

SX1 K1 am-en, A31008-H6500-A5-1-7619 (29. July 2003, 19:32)
14

Insert SIM card/battery

The service provider supplies you
with a SIM card on which all the
important data for your line is
stored. If the SIM card has been
delivered in credit card size, snap the
smaller segment out and remove
any rough edges.
• Press the lock
lid in the direction indicated by
the arrow
.
• Remove the battery upwards

Getting started

and remove the
.
• Insert SIM card in the opening
with contacts pointing downwards.
First push at the phones edge
than push gently until it engages
(make sure the angled corner is
in the correct position).
• Insert battery into phone
• Close the lid by reversing the
method described in
Note
Always switch off phone before removing
the battery!
Only 3-Volt SIM cards are supported.
Please contact your service provider if you
have an older card.
,
.
.

Advertisement

Table of Contents
loading

Table of Contents