Table of Contents
Advertisement
S56 am, A31008-H5700-A40-1-7619 (6. December 2002, 13:46)
urity
The phone and SIM card are protect-
ed against misuse by several security
codes.
Keep these confidential numbers in a
safe place where you can access them
again if required.
K
Setup
§Menu§
K
then select function.
Security codes
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature, but you
risk unauthorized use of the phone.
Some service providers do not per-
mit deactivation of the control.
§Select§
J
§OK§
§Change§
§OK§
Change PIN
You can change the PIN to any 4-8
digit number you find easier to re-
member.
J
§OK§
J
§OK§
,
J
§OK§
,
K
Security
Press.
Enter PIN.
Confirm input.
Press.
Confirm.
Enter current PIN.
Press.
Enter new PIN.
Repeat new PIN.
Security
Change PIN2
(display only if PIN 2 is available).
Proceed as with
Chg.phonecode
You define and enter the phone
codes (4-8 digits) when calling up
a phone-code protected function
for the first time. It is then valid for
all phone-code protected functions.
After three incorrect entries the
phone is locked. If this happens,
please contact Siemens Service
(page 57).
Clear SIM-card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Prevent accidental activation
Even if PIN entry is deactivated,
confirmation is required to switch
on phone. This prevents the phone
from being switched on accidentally,
e.g.
B
§OK
Change
PIN.
Hold down.
Press. The phone
switches on.
17
Advertisement
Table of Contents
