Getting Started; Inserting The Sim Card/ Battery - Siemens SXG75 User Manual

of SXG75, FUG us-en, A31008-H8900-A1-1-7619 (07.10.2005, 13:11)
right page (15)

Getting started

Your phone's display is supplied with
a protective film. Remove this film
slowly before using the phone.
In rare cases, static discharge may
cause discolouration at the edges of
the display. However, this will disap-
pear within approx. 10 minutes.
Inserting the SIM card/
battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
Getting started
• Push the cover towards the front
in the direction indicated by the
arrow 1.
2
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then press the SIM
card slightly to push it in
sure that the chamfered corner is
in the correct position).
15
2 (en-