To Remove the System Unit Cover
Turn off the system power.
1.
Disconnect the system unit power cord.
2.
Loosen the captive screw that holds the cover.
3.
Face the front of the system unit and grip each side of the
4.
system unit cover.
Pull the cover toward you until it comes loose from the
5.
chassis. Then lift the cover up and away from the system
unit.
To Install the System Unit Cover
Place the system unit cover on the chassis. Leave at least 2
6.
inches between the cover and the back of the system unit.
Slide the system unit cover toward the back of the system
7.
unit until it pops into place.
Tighten the captive screw.
8.
Reconnect the system unit power cord to the system unit
9.
power connector.
2–6 Service Operations