DEC DECstation 5000 Model 200 Maintenance Manual page 264

Table G-2 (Cont.). Minor Error and Status Error Codes
Minor code
047d
047e
047f
0480
0481
0482
0483
0484
0485
0486
0487
0489
048a
048b
048c
048d
048e
048f
0490
0491
0492
0493
0494
0495
0496
0497
0498
0499
049a
G–8 Console Status and Error Message Codes Generated by Version PDE3 ROM Chips
Meaning
SCSI has no iopb.
SCSI device is inappropriate type.
SCSI check condition status reported.
SCSI unexpected status reported.
SCSI sense failure occurred.
SCSI sense failure occurred.
SCSI did not handle message.
SCSI did not handle message.
TFTP acknowledgment message block number does not
match.
TFTP filename is too long.
TFTP data message block number does not match.
TFTP I/O function error occurred.
TFTP server could not find file.
No ioctls are supported by TFTP.
TFTP invalid host or server IP address was specified.
TFTP host or file name is too large.
TFTP does not support read and write mode.
TFTP backward seek occurred.
TFTP backward seek occurred.
Ethernet hardware error occurred during LANCE
initialization.
Ethernet did not finish initialization.
Ethernet internal error occurred.
Ethernet did not implement ioctl function.
Ethernet did not implement network protocol.
Ethernet data overrun occurred.
No room for Ethernet channel.
Ethernet data was truncated during write.
Common SCSI error occurred.
SCSI experienced spurious interrupt.
(continued on next page)