DEC DECstation 5000 Model 200 Maintenance Manual page 192

Table E-3 (Cont.). Environment Variables Set by the User
Environment
Variable
console
Kbd
scsiid0
scsiid1
scsiid2
scsiid3
E–14 Console Commands Generated by Version PDE3 ROM Chips
Description
One or more devices to use as the console terminal.
If more than one device is designated as a console,
the system accepts input from and sends output to all
designated devices. The following are allowable values:
tty(0), which enables the system's regular console
tty(2), which enables a terminal attached to the
right communications line connector
tty(3), which enables a terminal attached to the
left communications line connector
The regular console is the system's default console,
if available. If this console is not available, the
next default is a console attached to the right
communications line connector.
Keyboard language. Specify the number that
corresponds to the keyboard language you want to use.
To display available languages and numbers, set Kbd
to 0 and turn off the system unit. The list of keyboard
languages appears on the monitor.
Address given to the controller on the system's first
SCSI bus. Default is 6.
Address given to the controller on the system's second
SCSI bus. Default is 6.
Address given to the controller on the system's third
SCSI bus. Default is 6.
Address given to the controller on the system's fourth
SCSI bus. Default is 6.