System And Memory Module Configurations - DEC DECstation 5000 Model 200 Maintenance Manual

System and memory module configurations
To obtain a detailed configuration display for the system and
memory modules, type cnfg f and press Return. A display
similar to this appears on the monitor:
BSys -
Mem: 8388608 bytes (8M)
RS232: (tty/DZ chip) [xx.y-000]
#0 - [Kbd]
#1 - [Pdev]
#2 -
#3 -
Optn# 5 - [PMAZ-AA /0x5419876/0x0]
SCSI: 2: rz(0,2) -- Pid = RZ55 (C)DEC, Vid=DEC, Rev=0700
1: rz(0,1) -- Pid = RZ55 (C)DEC, Vid=DEC, Rev=0700
Optn# 6 -
Net: 00-00-00-00-00-00 (mop/LANCE chip) [xx.y-00]
Net: 08-00-2B-0C-E3-EA (mop/LANCE chip) [x.-00]
In this display, Bsys refers to the system and memory modules.
Entries under the Bsys heading have the following meanings:
Mem shows the amount of system memory.
RS232 shows the system's serial line hardware. The values
to the right of RS232 show the serial line controller's
version. Entries under the RS232 heading list each serial
line and any device connected to it.
Optn# 5 is the SCSI controller on the system module.
Listings under Optn# 5 show any drives connected to this
SCSI controller. This system has two hard disk drives
connected to the system module's SCSI controller.
Optn# 6 is the ThinWire Ethernet on the system module.
The string of numbers under Optn# 6 is the ThinWire
Ethernet station address.
Console Commands Generated by Version PDE3 ROM Chips E–9