Display 2 - Faults - Epas - Bad Boy Stampede 4x4 Owner's Manual

Display 2 - FAULTS - EPAS

NOTICE: Only the CLEAR option in this menu is editable.
1. With FAULTS (with EPAS symbol) displayed, press the RIGHT arrow to
enter the fault codes menu.
2. Press UP or DOWN to scroll through fault code
displays:
• Display A indicates no trouble code. No further action
required.
• Display B indicates a historical (HIST on right) trouble
code.
• Display C indicates an active (ACTI on right) trouble
code.
• Display D indicates vehicle not EPAS equipped or the
EPAS is disabled.
3. Press DOWN to scroll through additional trouble codes if there
are any. CLEAR will be the last display.
4. Press the OK button to enter the edit mode (wrench displays).
LEFT and RIGHT arrows toggle YES and NO.
• Select NO and press OK to exit edit mode without clearing
codes.
• Select YES and press OK to clear codes.
5. Press LEFT arrow to return to top level display.
A
B
(example code)
C
(example code)
D
F T
AULT ESTING
73