Table of Contents
Advertisement
5.
Either of the REPL displays (B or D) indicates scheduled
maintenance is due. After the maintenance is complete, the
maintenance reminder can be cleared.
• In OIL REPL or SPARK REPL, press OK on the display
control pad to enter edit mode (wrench displays).
– Use the LEFT and RIGHT arrows to toggle between
REPL and COMP (for complete).
– Select the COMP option and press the OK button to
clear the maintenance reminder. If the REPL option is
selected when the OK button is pressed, editing exits
without clearing the reminder.
6.
Press LEFT arrow to return to top level display.
Display 4 - SETUP
NOTICE: All options in this menu are editable.
1.
With SETUP displayed, press the RIGHT arrow to enter the setup
menu.
2.
Press the UP and DOWN arrows to scroll through the
setup menu:
• Display A indicates the unit of measure selected.
– Press OK to enter edit mode.
– Press the LEFT and RIGHT arrows to toggle
between USCS (US Customary System) and METR
(Metric).
– Press OK to select preference.
• Display B is the enable/disable EPAS option.
– Press OK to enter edit mode.
– LEFT and RIGHT arrows toggle YES and NO.
– Press OK to select preference.
• Display C is the leading zero option for the speed dis-
play.
– Press OK to enter edit mode.
– LEFT and RIGHT arrows toggle YES and NO.
– Press OK to select preference.
3.
Press LEFT arrow to return to top level display.
F
EATURES AND
A
A
B
C
C
ONTROLS
23
Hide quick links:
Advertisement
Table of Contents
