Rear Differential Lock Switch (If Equipped); All-Wheel Drive (Awd) Switch; Driver Information Center; Display Control Pad - Bad Boy Stampede 4x4 Owner's Manual

1/10 scale monster truck. ready-to-race with traxxas stability management
Table of Contents

Advertisement

F
C
EATURES AND

REAR DIFFERENTIAL LOCK SWITCH (IF EQUIPPED)

The rear differential lock switch is a two-position switch.
• upper – locked
• lower – unlocked

ALL-WHEEL DRIVE (AWD) SWITCH

The AWD switch is a two-position switch.
• upper – power is transferred to the front wheels and the vehicle is in AWD
• lower – front differential is unlocked and the vehicle is in 2WD (two-wheel drive)

DRIVER INFORMATION CENTER

All segments on the LCD display screen will display for one second at start-up. The brightness of the
display backlight is adjustable and will be the same at start-up as it was at last shutdown.

Display Control Pad

The display control pad beside the display screen allows the user to perform the following functions:
• navigate through the selectable displays in the driver information center
• enter and navigate through the diagnostic mode (see Diagnostics on page 71)
• clear the service reminder light after service is completed (see Diagnostics on page 71)
• adjust the brightness of the LCD display screen

Adjust Backlight

Press the up and down buttons on the control pad to brighten and dim the backlight of the display screen and all of the
lighted switches (if equipped).
1.
Clock
2.
Gear Indicator
3.
Headlight Beam Indicator
4.
Drivetrain Mode Indicator
5.
Engine Temperature Indicator
6.
Fuel Level Indicator
7.
Tachometer
8.
Low Oil Pressure Indicator
9.
Engine Malfunction Indicator
10. Engine Maintenance Indicator
11. Multifunction Display*
12. EPAS Fault Indicator
13. Speedometer
14. Seat Belt Indicator
15. EPAS Enabled Indicator
16. Diagnostic Mode Indicator
17. Low Battery Voltage Indicator
* Use the left and right buttons on the
display control pad to scroll through the
following options in the multifunction display (11):
• odometer (MI or km)
• trip odometer (MI TRIP or km TRIP) - With this option displayed, the trip odometer can be reset by pressing and
holding OK on the display control pad until the number resets to 0.0 (approximately 3 seconds).
• engine hours (HRS)
20
ONTROLS
14
17
13
15
12
1
2
11
10 9
3
4
5
6
16 8
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents