Emission Control Information Label; Emissions Hang Tag - Bad Boy Stampede 4x4 Owner's Manual

E C
MISSION ONTROL

EMISSION CONTROL INFORMATION LABEL

The Emission Control Information label is located on the left rear frame, under the truck bed. It is visible and accessi-
ble without the removal of any parts. The Date of Manufacture will be identified on the label (MM/YYYY).
VEHICLE EMISSION CONTROL INFORMATION
EXHAUST EMISSION CONTROL SYSTEM (ECS): TWC, SFI, ECM, O2S
ENGINE FAMILY:
VALVE CLEARANCE (ENGINE COLD) INTAKE: 0.1 - 0.2 mm EXHAUST: 0.2 - 0.3 mm
SPARK PLUG: CHAMPION RC7PYCBX
THIS VEHICLE IS CERTIFIED TO OPERATE ON UNLEADED GASOLINE
ENGINE OIL: SAE 0W-40 FULL SYNTHETIC (see owner's manual)
THIS VEHICLE MEETS U.S. EPA AND CALIFORNIA REGULATIONS FOR
IS CERTIFIED TO EPA 1.5 g/km HC+NOx AND 35.0 g/km CO PER §1051.107 AND TO CALIFORNIA
1.2 g/km HC AND 15.0 g/km CO PER 13CCR § 2412 EXHAUST EMISSIONS STANDARDS AND
MEETS U.S. EPA AND CALIFORNIA EVAP STANDARDS USING CERTIFIED COMPONENTS.

EMISSIONS HANG TAG

The Emissions Hang Tag is attached to the steering wheel/column with a zip tie.
44
S
YSTEMS
EVAP FAMILY:
TUNE-UP SPECIFICATIONS
ELECTRODE GAP (COLD): 0.69 - 0.84 mm
643601
DOM (MM/YYYY)
MY ATVbs. IT