Spark Plugs; Spark Plug Inspection And Replacement - Bad Boy Stampede 4x4 Owner's Manual

6. Remove the vehicle speed sensor.
7. To fill the lower chamber to capacity, add 22 oz. (650 ml)
through the speed sensor hole.
8. Replace the speed sensor.

SPARK PLUGS

Tools
• spark plug socket, 5/8"
• hex head screwdriver, 5 mm
• anti-seize compound
• extension
Recommended spark plug: Champion RC7PYCBX

Spark Plug Inspection and Replacement

Remove the spark plugs when the engine is cold.
1. Disconnect the engine from the power supply.
2. Disconnect the wire harness connectors from the ignition
coils.
3. Remove the bolts.
4. Pull straight up on the ignition coils to remove from the
engine.
Fill Plug - Speed Sensor
• torque wrench
• feeler gauge
• ratchet
M
AINTENANCE
Wire Harness to
Ignition Coil
Connector
Bolt
Ignition Coil
55