Table of Contents
Advertisement
ACCELERATING
1.
Release the brake pedal completely.
2.
Press the accelerator pedal with gradual and steady pressure until the vehicle reaches the desired speed.
BRAKING
When carrying cargo or towing a trailer, the weight of the load will increase the braking
distance required to slow or stop the vehicle. Not allowing for increased braking dis-
tance under load can cause an accident or injury.
1.
Release the accelerator pedal completely.
2.
Press the brake pedal firmly.
3.
Practice starting and stopping using the brake until you are familiar with the controls.
DRIVING PROCEDURE
1.
Perform the pre-ride inspection. See page 29.
2.
Wear protective riding gear:
• helmet
• eye protection
• gloves
• long-sleeve shirt
• long pants
• over-the-ankle boots
3.
Sit in the driver's seat and fasten the seat belt.
Close the door.
4.
Start the engine and allow it to warm up.
5.
Check surroundings and determine the path of
travel.
6.
Press the brake pedal and shift the transmis-
sion into L (low) or H (high) gear.
7.
With both hands on the steering wheel, release the brake pedal and immediately start to apply gradual and
steady pressure to the accelerator pedal.
8.
Practice maneuvering the vehicle using the accelerator and brake pedals. Drive slowly and cautiously until you
are comfortable with the controls.
9.
Do not drive with a passenger until you have at least two hours of experience driving this vehicle.
DRIVING WITH A PASSENGER
• All passengers must be at least 12 years old.
• All passengers must be able to sit with their back against the seat, both feet on the floor and both hands on the pas-
senger hand hold.
• Do not allow more than one passenger in the vehicle.
• Do not allow a passenger to ride anywhere on the vehicle except the passenger seat.
• Travel at speeds appropriate for your skills, your passenger's skills and the operating conditions. Avoid unexpected
or aggressive maneuvers that could cause discomfort or injury to the passenger.
• The handling characteristics can change with the added weight of a passenger. Allow more time and distance for
braking.
• Follow all operating guidelines as described on the safety labels on the vehicle and in this manual.
1.
Perform the pre-ride inspection. See page 29.
2.
Make sure you and your passenger are wearing protective riding gear:
• helmet
• eye protection
• gloves
3.
Make sure you and your passenger have seat belts correctly fastened.
4.
Close both cab doors.
• long-sleeve shirt
• long pants
• over-the-ankle boots
O
PERATION
31
Hide quick links:
Advertisement
Table of Contents
